121 (out of production)

It derives directly from the entry level model of the range. New Horizon 121 proposes the same project, while the adoption of a thicker and heavier crystal clear methacrylate platter increases authority and
fluidity to the reproduced music compared to the basic model. The high quality of the materials and the construction care are common to the other models in the New Horizon range.

An affordable turntable for everyone. A product that's second to none.

MADE in ITALY product to be proud of.

In depth

Synchronous AC motor

The turntable pulsating heart is the compact 24VAC synchronous motor whose main feature is its extremely regular rotation, independent from the variations of the mains voltage, given that its speed depends on the mains frequency. The high torque and the rotation speed of 500 rpm actively contribute to the regularity and fluidity of the plate rotation.

Mechanical suspension

121 is a set of mechanical parts in action. The largest internal source of noise and vibrations is the motor that must be isolated as much as possible from all other parts of the turntable. The engine insulation in New Horizon turntables is made by an exclusive mechanical suspension system. Through precision steel springs, calibrated on the suspended weight of the motor and the pulley, the oscillation transmission to the plinth is efficiently blocked.

Belt drive

The transmission of the motion to the plate is obtained by a special belt in natural rubber. The choice of this material ensures an excellent energy transfer and a good decoupling from the vibrations produced by the engine during the operation.

Inverted bearing

One of the strong points in New Horizon turntables is the plate rotation pivot. The perfection of the movement is the result of a accurate project and several prototypes. Today the piece in production has a sturdy inverted bearing structure in three pieces of aluminum and steel that guarantee the maximum “silence” and a very low rotation friction.

Aluminum arm

The straight 8,6″ arm is supplied and ready for operation. Equipped with an MM cartridge with aluminum stylus and calibrated on the right reading weight. Also the anti-skating is self-regulated. The aluminum rod ensure the necessary rigidity, letting the cartridge extracting the best sound from the grooves of the vinyl.

Plinth HD

121 is a rigid-base turntable. It is essential that the base, or plinth, is able to keep stable the fixing of the other parts of the apparel and to stand opposite to the transmission of vibrations and resonances: our choice at New Horizon is the compressed recycled wood pulp and artificial resins. This material is extremely smooth and heavy and its isomorphic composition works much more efficiently than the solid wood.

Methacrylate plate

The appearance is extremely important: on New Horizon turntables there are only laser-cut plates in Crystal Methacrylate. This material with a high specific weight combines the excellent ability to disperse the vibrations kinetic energy, to the elegance of a perfect transparency.

Output on RCA terminals

New Horizon turntables are interfaced in the best way with all your electronics. An excellent insulating material plate accommodates the gold-plated RCA output terminals and the separate earth connector.

Tech Spec 121

Turntable System
Tonearm
Cartridge
Drive System
Motor
Decoupling
Speed
Speed Selection
Platter
Size (WxDxH)
Weight (Shipping)
Finish
Included accessories
Single Rigid Plinth
8.6″ Aluminium Arm
Audio Technica AT-91R MM
External Silicone Drive Belt
Synchronous AC
Motor by Springs
33 1/3, 45 rpm
Mechanical
12mm / 1.05kg Crystal methacrylate, Machined
450 x 365 x 102 mm
4.9 (5.8) kg
Laminated black
RCA Interconnection Cables
Wall Plug 24VAC / 500mA Power Supply
Owner Manual
Cartridge Reference Template