The 303i takes on the task of representing the highest expression of the New Horizon philosophy.
Every single element that makes up the turntable has been studied, redesigned and brought back to the maximum of its functional essence.
Everything helps to make the forms powerful and from the first glance you can see the energy released by the perfection of the dynamic trajectories that run through the turntable.
Order and cleanliness reign supreme both below and above the surface, showing only the essential and the seductive.
Sturdy bones and a full-bodied structure for this impressive turntable that translates into a majestic, decisive and delicate sound. The merit goes to the synergy of the elements that compose it and to the excellence of the materials combined with an important, unique, beautiful design.

Plus Points

HWT Plinth

Heavy Weight and Thickness – il 303i eredita lo stesso grande plinto del 203. I tre plinti sono formalmente uniti in un unico corpo ma fisicamente disaccoppiarti fra loro da uno strato di materiale isolante antivibrazioni. I tre elementi fondamentali del giradischi sono fissati ognuno sul proprio plinto in modo da garantire la stabilità del fissaggio e la massima resilienza alle vibrazioni. Grazie all’HDF (High Density Fibreboard, pasta di legno ad alta densità legata da resine artificiali) che ha una composizione isomorfa ed un peso elevato, la frequenza di la risonanza si sposta in una gamma ben lontana dall’udibile. Questo assetto separa totalmente tra loro le sezioni a tutto vantaggio del suono.

Synchronous AC motor

The turntable pulsating heart is the compact 24VAC synchronous motor whose main feature is its extremely regular rotation, independent from the variations of the mains voltage, given that its speed depends on the mains frequency. The high torque and the rotation speed of 500 rpm actively contribute to the regularity and fluidity of the plate rotation.

Mechanical suspension

The 303i is a set of mechanical parts in action. The largest internal source of noise and vibrations is the motor that must be isolated as much as possible from all other parts of the turntable. The engine insulation in New Horizon turntables is made by an exclusive mechanical suspension system. Through precision steel springs, calibrated on the suspended weight of the motor and the pulley, the oscillation transmission to the plinth is efficiently blocked.

Belt Drive

The rotation motion is impressed on the platter by a transmission belt. The best possible solution was the use of silicone which ensures the most effective energy transfer and has an excellent durability. The one-piece mould belt is so thin that it concretizes the “zero feedback”, virtually decoupling the platter from the vibrations produced by the motor during operation.

BIB Brass Inverted Bearing

One of the Plus Points of the New Horizon turntables is the plate rotation pivot. The perfection of the movement is the result of an accurate project and several prototypes that led to the design of an inverted bearing architecture in three pieces. The supporting structure in chromed steel supports a sphere, which in 300’s line is made of ceramic, immersed in an oil bath. The brass cap holds the plate and ensures maximum “silence” with a very low friction rotation.

NH99 New Horizon Arm

The upper plinth of the 301i houses the exceptional 9″ NH99 straight arm. The movement of this jewel of mechanics is based on four high precision radial bearings completely in Ceramic. The tube is a sandwich of Nylon, Fiberglass and Brass worked to break down the resonances. The counterweight section is damped by a Teflon coating. It offers all the micro adjustments possible to take full advantage of the characteristics of any cartridge: Azimuth, VTA (vertical alignment of the barrel) and Horizontal alignment of the cartridge. New Horizon’s pride is Anti-Skating, a proprietary system created to be truly progressive. The arm is equipped with a complete set of accessories useful for its adjustment.

FLP Full Lathed Plate

Full Lathed Plate – The appearance is extremely important: the 303i is equipped with an extraordinary 30mm thick Crystal Methacrylate plate, laser cut and then precision lathe machined on all sides. This material has a natural elegance and a high specific weight, perfect for maintaining kinetic energy with a smooth rotation and dissipating vibrations.

RCA Output Terminals

New Horizon turntables are interfaced in the best way with all your electronics. In particular, the 300 series is equipped with two separate terminals for power and audio signal, to effectively isolate the delicate connections that carry the musical message from the cartridge. A robust plate holds high-quality gold-plated RCA output terminals and a separate ground connector.

Feet 6040RD

The New Horizon 6040RD feet enhance the sonic characteristics of any hifi device by providing better vibration and resonance isolation. They are made of Delrin®, steel, low density natural rubber and HQR compound (Hard Quiet Rubber), cleaning the system from spurious vibrations, noticeably improving the acoustic scene, detail and three-dimensionality.

Tech Spec 303i

Turntable System Triple Rigid/Decoupled Plinths
Decoupling Motor by Springs, Arm by Plynth, Pivot by Plynth
Tonearm 9" Straight NH 99
Arm Settings VTA, Alignment, Azimuth, Reading weight
Anti-Skating Real Progressive System
Cartridge Not provided
Drive System External Silicone Drive Belt
Motor Synchronous AC
Speed 33 1/3, 45 rpm
Speed Selection Mechanical
Platter 28mm / 2,3kg Crystal methacrylate, Machined
Bearing Inverted, Ceramic Pivot
Size (WxDxH) 450 x 365 x 165 mm
Weight (Shipping) 11,6 kg (13,4)
Finishing Matt Black or White coating
Included Accessories RCA Interconnection Cables
Laptop wired 24VAC / 500mA Power Supply
Methacrylate Dust Cover
Owner Manual
Cartridge Reference Template
Anti-Skating Weight
Arm's Balancing Weight
NH Sling Bar
2 x Hexagonal Wrench
VTA & Azimuth Tool